Complete set of  KME NEVO-SKY JET ECO 4-cyl DG8 electronic

The set includes: 

KME NEVO SKY JET ECO COMPUTER

CONTROL UNIT with full display

sensor: vacuum (MAP SENSOR),

temperature and level of gas fuel,

complete wiring,

Documentation.

New sequential gas injection system NEVO was developed over years of experience.

The main functions of the NEVO 

• Simple user interface and simple configuration and calibration of the system.Major system capabilities allow you to set the system in advanced cars and to solve difficult problems without the need to change to a different version of the.
  
• Completely new management mechanisms dose of gas.
  
• The heart of the system is a new dual-core microcontroller for automotive industry.
  
• Update driver software using the PC software
  
• The automatic tuning system
  
• Small hermetic case.
  
• The new panel driver with built-in buzzer and auto-adjusting LED brightness depending on light intensity, display error codes and the time for switching and many other useful features.
  
• Advanced diagnostic system gives ease of maintenance and troubleshooting.
  
• Powerful recorder.
  
• Adapted by map throughout the rev range with the possibility of lern
  
• Automatic setting of the engine parameters, or Auto-configuration
  
• The new calibration system ensures complete alignment by taking into account the characteristics of the gas injectors and intelligent interpretation of information at idle
  
• Correction for acceleration
  
• Adding fuel on gas
  
• Warming injectors
  
• Strategies for the mode cut-off
  
• Full range of strategies with automatic return to gas.
  
• The possibility of an emergency starter for the gas.
  
• The ability to read time driver on petrol and gas
  
• Read the maximum and current temperature inside the controller and the number of resets
  
• The ability to set actions for error Modern reducer for sequential injection

  KME TUR (Slim version - thinner than Silver)
  

  Because of its reliability and simplicity of construction
  it allows for long and trouble-free operation of the gas system.
  
  Reducer supports cars up to 200 hp
  
  Brand KME is a guarantee of high quality and efficiency of the device.

VALTEK gas solenoid valve AMP

Model: TYPE 03

Solenoid valve with a built-in gas filter for pipes with a diameter of 6 mm, the solenoid valve is characterized by very easy installation and much more convenient replacement of gas filters and small dimensions.

Technical data:

• Gas inlet: M10x1 for 6mm copper pipe or equivalent
• Gas outlet: M10x1 for 6mm copper pipe or equivalent
• Coil voltage: 12V
•  Coil power: 11W

Included in set:

• Solenoid valve
• 6 mm clamps and barrels
• Mounting accessories
• Liquid phase filter (mounted)

KME FENIX

Injection rail Injector for 4 cylinder 

• MAX. OUTPUT AT A PRESSURE OF 1 BAR: 120 NL / MIN
• MAX. POWER: 65 KM
• MIN. STABLE OPENING TIME: 1.55 ms
• COIL RESISTANCE: 1.9 ohm +/- 5%
• OPENING DELAY: 1.70 ms
• MAX. OPENING CURRENT: 6 A.
• MAX. HOLDING CURRENT: 2 A.
• MAX. WORKING PRESSURE: 4.5 Bar
• WORKING TEMPERATURE: -20 to +120 degrees C.
• POWER VOLTAGE: 12 to 16V
• CONNECTOR: Superseal
• VERSIONS OF EXECUTION: 1, 2, 3, 4 cylinders
• FLOW ADJUSTMENT: By means of calibration nozzles
• COATING: Fluoropolymer

volatile phase Filters forsequence installation

It has connections with the dimensions 12 mm

Recommended for Stage, KME etc. ..

Filter "Long Life" with a large filter cartridge recommend replacing every 15,000 km

FILTER FL01S

Constructed from aluminum

The filter cartridge:

- Paper VH 134 843 Incl. Hollinsworth & Vose J. C. Binzer

- 0,031 m2 filter area

- Capacity of 9.45 l / s

- captures particles 1 micrometer

Operating temperature -20 ° C ÷ 105 ° C

Working pressure 250 kPa

Input: ? 12

Output: ? 12

Homologation LPG: E20 67R 010703 Class 2

CNG: E20 110R 000 025 Class 2