AG ZENIT BLAC BOX 4 cyl set

Zenit Blue Box is a modern controller for sequential gaspower supply systems in the volatilephase is dedicated for 4 cylinders engines.

Electronics:

• Zenit Blue Box controller 
• wiring
• MAP sensor  integrated with gas temperature sensor
• switch
• Temperature sensor

Zenit Blue Box electronics is a universal component of the autogas system. After considering the parameters of the engine, its other components are selected.

Functionality:

- gas pressure sensor and MAP sensor integrated with gas-flow temperature sensor

- user friendly software for calibration and system configuration based on Zenit Compact and Zenit Pro systems, which are well known for installers

- extensive diagnostic and many additional functions to facilitate the installation new ergonomic switch 

- ECU is compatible

Injection rail HERCULES GISM-i3110 4-cyl. ver.

In recent injectors Hercules choice for a specific engine (power/cylinder) is carried out through an appropriate nozzle calibration.

 Hercules offered without nozzle injector corresponds to a yield of 35-50 HP /cyl.

Hercules is the injector with a modern design that provides a rapid response toan electrical signal, gas metering accuracy linear performance characteristics,very high efficiency and self-cleaning of the dirt.

The set includes:

Injection bar HERCULES 4 cyl. - 1 piece
Connection M14x1- 1 piece
Cap - 1 piece

SPECIFICATIONS:

• - LPG or CNG fuel
• coil resistance: 1.7 Om
• minimum opening time: 2 ms
• closing time: 0.8 ms
• maximum expenditure: 150 l / min
• permissible working pressure: 0.2 - 4.2 bar
• maximum working pressure: 4.5 bar
• supply voltage: DC 6V - 18V
• working temperature: -40 to +120 degrees Celsius
• AMP 282104-1 connector (type Valtek)
• current control: Peak & Hold
• housing: stainless steel
• approvals 67R-01 and 110R-00
• regulated by screwed nozzles (not applicable to the BF version)
• a built-in filter at the gas inlet (for injectors mounted on a rail)
• Teflon coated plunger and unique piston chamber design for high durability, excellent reliability, resistance to dirt and difficult working conditions
• available individually and in 2, 3 and 4 cylinder bars
• recommended use of the Twister filter

Nozzles are the 3 types depending on the engine power available in our offer:
2.4mm // 24-36 hp / cyl.
2,1mm // 17-27 hp / cyl.
1,9mm // - 20 hp / cyl.

Modern reducer for sequential gas injection

MAGIC III COMPACT with filter and electrovalve / selenoid valve

Original Magic III reducer - The latest revised version

Thanks to the division of the special gas feeding system in the reducer with the help of a piston, which changes its operating characteristics, it is very efficient while maintaining a very small size.

The reducer supports vehicles with a power not exceeding 250 HP, and in the case of using a second, additional connection, 350 HP ( included )

The reducer was tested, among others, in the Audi 4,2 Jeep 4,7 Ram 5700 Saab turbo and many others

Kit composition:

    Reducer
    Temperature sensor used
    Barrels and sealing clamps
    Mounting plate
    Small assembly elements
    Second gas outlet port
    MAGIC LPG electrovalve
    MAGIC liquid phase filter

Technical data:

    Maximum performance: 257kW / 350KM
    Working settings: 0.9 - 1.6bar
    Power: 6mm copper copper or equivalent power supply
    Power socket: M10x1.0
    Outer diameter of the gas outlet port: 12mm
    External connections for lighting systems: 16mm
    Outer diameter of the vacuum nozzle: 5mm
    Working temperature: -20 ° C ÷ 120 ° C
    Temperature temperature resistance: 4.7kOhm
    Solenoid valve coil: 12V
    Solenoid valve input / output: 6mm copper Cu or equivalent management
    Filter input / output: output: copper Cu 6mm or equivalent

A complete set of an AC / STAG LPG selenoid Valve

AC STD E-01 6x6mm

The task of the solenoid valve is to cut off the LPG supply to the reducer while driving on petrol, at a standstill or during a breakdown, and to filter the gas in liquid form before reaching the reducer.

Easy filter replacement.

Technical data:

     COIL POWER: 12V 8.5W
     LPG input / output: 6mm CU FI cable or equivalent
     Electrical connection: hairpins
     Liquid phase filter element: Paper exchangeable

Included:

     AC Selenoid Valve E-01 STD
     Mounting plate
     Mounting screws
     Nuts and washers
     Clamps and barrels for 6 mm Cu A complete set of an AC / STAG LPG selenoid Valve

AC STD E-01 6x6mm

The task of the solenoid valve is to cut off the LPG supply to the reducer while driving on petrol, at a standstill or during a breakdown, and to filter the gas in liquid form before reaching the reducer.

Easy filter replacement.

Technical data:

     COIL POWER: 12V 8.5W
     LPG input / output: 6mm CU FI cable or equivalent
     Electrical connection: hairpins
     Liquid phase filter element: Paper exchangeable

Included:

     AC Selenoid Valve E-01 STD
     Mounting plate
     Mounting screws
     Nuts and washers
     Clamps and barrels for 6 mm Cu conductor